1. Switch to cold weather hydraulic and engine oils
Synthetic and multi-grade oil is usually sufficient for the range of temperatures experienced in most European countries throughout the year. However, if you are regularly operating in sub-zero temperatures, you may wish to consider using specific cold weather hydraulic and engine oils instead. This will ensure the optimum viscosity for performance even in snow and ice.
2. Use a dedicated winter diesel
Similarly, consider using a dedicated winter or arctic diesel, which has a lower freezing point than standard diesel, as well as a better cold filter plugging point. It is also recommended to fill the fuel tank to more than 70% to mimimise any corrosive condensation.
3. Increase the concentration of your coolant
The lower the temperature, the higher the recommended concentration of coolant. Down to -10ºC you can use a concentration of 40% but if you are working in temperatures as low as -50ºC, you should increase it to 50%.
4. Test your batteries
Batteries can lose up to 50% of their strength in cold environments so if your battery is already weak, your excavator is unlikely to start. In preparation for the winter months, use a battery tester to check the voltage and watch for performance signals, such as a sluggish or slow engine turnover.
5. Consider additional cold weather options
Volvo CE offers a range of cold weather options for excavators to improve performance, minimise maintenance and enhance operator comfort. These include engine block heaters to warm up the engine block before starting; diesel-powered coolant heaters to also help cold weather starting and warm the cab; water separators with heaters to help minimise wax build up in diesel fuel; and arctic rated hoses, developed to handle conditions down to -40ºC.
With a little bit of preparation and assistance from your local Volvo CE dealer, your excavator will be primed to keep on producing – and earning – throughout the winter months.